The Association for Specialist Fire Protection (ASFP) has released three new and three updated documents which cover the structural ﬁre protection of steel beams with corrugated webs, the ﬁrestopping of metal pipes, and planned maintenance.
The new Advisory Notes 27, 28 and 29 offer advice on particular issues of concern to the industry. Advisory Note 27 provides advice on the structural ﬁre protection of steel beams with corrugated webs. These fabricated sections, which were recently introduced to the market, offer a thinner steel plate than can be used in traditional webs. While this saves weight and cost, the fire-resisting performance of these sections is not fully understood. The advisory note warns against the use of plain section data in support of a corrugated web section without extra testing.
Advisory Note 28 covers the ﬁrestopping of metal pipes where ﬂanges are located close to service penetration seals. It encourages earlier involvement of passive ﬁre specialists to prevent the construction of untested service penetration arrangements, particularly in the presence of ﬂanges within the secondary insulation zone (typically within 500mm of the wall). Arrangements of ﬂanges can be covered within the scope of BS EN 1366-3: Fire resistance tests for service installations. Penetration seals, although this is not commonplace. For the avoidance of issues with certiﬁcation and installation, it is simplest to keep the ﬂanges more than 500mm away from the wall. However, this detail is not always considered during the spatial coordination of services.
The ﬁnal new publication, Advisory Note 29 covers planned maintenance. This draws upon advice from within the Regulatory Reform (Fire Safety) Order; BS 9999: Code of practice for fire safety in the design, management and use of buildings; and BS 8524: Active fire curtain barrier assemblies to ensure that a competent person conducts that maintenance.
Meanwhile, Advisory Note 21 has been updated. This covers coatback to secondary structural steel. It highlights that this can prevent conduction of heat into a primary structural member and its consequent early failure. As new evidence becomes available, it is likely that this document will be updated again.
Technical Guidance Documents (TGDs) 15 and 20 have also been revised. TGD 15 provides advice on the installation and inspection of spray-applied passive fire protection. The document has been updated to align the ﬁlm thickness measurement criteria for these materials to ASTM E805. The document has also been updated to take the implications of Brexit into account and the consequent changes to UK Construction Product regulations.
The changes to UK Construction Product regulations and the introduction of the UKCA mark also prompted the revision of TGD 20, which covers the CE marking of ﬁre-resisting and smoke control duct sections. All the documents are available for download from the Publications area of the ASFP website.
Featuring a Learning Zone, the ASFP Pavilion aims to help visitors to gain a greater understanding of the essential role of passive fire protection within today’s built environment. ASFP will be showcasing its range of training courses, guidance documents and membership services and offering advice for all involved from designers, specifiers and contractors, to building owners, risk assessors and facilities managers. The Pavilion also brings together in one location a number of ASFP member companies, representing a cross section of the passive fire protection sector.
The Learning Zone will be the location for the Passive Fire Protection Conference, which will feature expert speakers each day, discussing key issues of concern. This is free to attend for anyone visiting the event and is CPD accredited.
For full details of the ASFP Firex Programme and to register for the event click here.